We are known for offering Industrial AMF Panels to the customers. These automatic mains failure panels are used as automatically changeover from mains to stand-by generator in case of power failure. Highly demanded in foundries, apartments, sugar, textiles, chemical industries and others, these panels are designed in compliance with the international quality standards. AMF Panels and Battery Chargers are used where generators are installed between main AC & load. Besides, it starts and stops the generator in an automatic manner and changeover the EB/generator lines.
AMF Panel & Battery Chargers are used where the generators are installed between main AC and load.
It will Start and Stop the Generator automatically and Changeover the EB/Generator lines.
|Bus Bar||Tinned EC Grade Copper/ Aluminum Sleeved with Colored PVC|
|Bus Bar Short Circuit||Up to 50KA for 3 Seconds Duration|
|Type of construction||Free Standing, Floor Mounted, Cubicle Design|
|Degree Of protection||IP 5X|
|Enclosure||RITTAL MODULAR ENCLOSURE with 1.6mm/2mm CRCA sheet steel, Dip coated and Powder coated as per International standards|
|Color||RAL 7032 Shade|
|DG Sync Relay||DEIF AGC Series|
1. Our AMF Panels panels are made of fully RITTAL Enclosures.
2. Provides continues monitoring of three phases.
3. Automatic Shut down during DG Fault.
4. Auto/Manual Selector is available.
5. Generator Stop with delay of timing possible.
6. Hooter Alarm Annunciation for fail to start.
7. Emergency Stop is available.